VENTBOSS
•
G130 OWNER’S MANUAL
11
SECTION 500
MAINTENANCE
Replacing the Filter Cartridge
The durable, high grade A15 filter of the VentBoss G130 Portable can be back pulsed by
connecting an air source to the ball valve at the bottom front of the unit (see Figure 4) or
removed and cleaned with compressed air to deliver hours of filtration. If the unit still does
not draw sufficiently, then replace the filter by releasing the front latch and carefully removing
the dirty filter.
Replacing the Metal Spark Arrestor
The metal spark arrestor should be removed and cleaned on a regular basis depending on
usage. If particulate builds up on the baffle the risk of fire in the system is greatly increased.
When the filter is dirty it should be removed and cleaned with a hot detergent solution. If the
filter becomes bent or deformed beyond repair it should be replaced.
DO NOT replace the metal spark arrestor with anything other than what was originally installed
in the VentBoss G130. Failure to do so will greatly increase the risk of fire.
Replacement filters may be ordered by calling VentBoss at 1-855-558-VENT.
Summary of Contents for VENTBOSS G130
Page 1: ...MODEL G130 OWNER S MANUAL Installation Operation Maintenance SERIES 100 TOUGH PORTABLES ...
Page 2: ......
Page 13: ......