RoboVent VentBoss 300 Series, Owner'S Manual

Page: 17 / 32

VENTBOSS
•
SERIES 300 SPACE SAVER COLLECTORS OWNER’S MANUAL 17
SECTION 700
MAINTENANCE
FIGURE 11
FIGURE 12
FIGURE 13
Replacing the Filter Cartridge
The Nanofiber MERV15 cartridge filter can be pulse
cleaned multiple times before it needs to be replaced.
Prior to making a decision to replace the filter, first
follow the procedures of “Pulsing the VentBoss Series
300 Collector” - Section 600. The cartridge can also be
taken out and manually cleaned with compressed air.
When performing these cleaning operations no longer
reduces the differential pressure (restriction to airflow),
which in turn will reduce the effectiveness of the unit,
it is time to change the cartridge filter with a new
replacement filter.
The RoboVent Pro-Series uses the SnapLock Front Load
System which is a specially designed lift mechanism
and a front load track that locks the cartridge filter in
place with a single action lever.
To Replace the filter cartridge, open the filter access
door and pull up on the two SnapLock levers, (Figure
11) releasing the filter cartridge. Now the filter can
be removed. (Figure 12) Reload the new Cartridge
Filter into the Filter Cabinet. Ensure filters are aligned
correctly in the SnapLock rails, to give an air-tight seal
when the gasket is compressed. Engage the SnapLock
by pushing down on the SnapLock levers to raise the
filters into place. Close and lock the cabinet door.
Replacement filters may be ordered by calling VentBoss
Product Group at 1-855-558-VENT.
Replacing the Metal Baffle Filters
VentBoss Series 300 collectors come equipped with
three internal baffle and metal mesh filters located in
the spark arrestance plenum. To access the baffle and
metal mesh filters release the two latches located at
the top and bottom of the spark arrestance door. Pull
each filter straight out. (Figure 13).
Both spark arrestance baffles should be removed and
cleaned on a regular basis (check every two weeks). If
particulate builds up on these baffles the risk of fire in