Ready light
advanced automatic light control
Input setup
Sensors are connected to
spare inputs of light controller.
Input must be configured to
ready light mode.
Sensor placement
For a best result, sensor must
be activated just after person
closes the door.
Short timeout
Time from closing the door to
light off. If time is too short,
light may turn off after
entering the room.
Long timeout
Time from leaving the room to
light off, without closing the
door.
How
does
it work
When door begins to open, reed sensor is activated and the light turns on. When a person enters the room and
closes the door, PIR activation means person is surely in the room. As long as door is closed, light will stay on.
When person leaves room and closes door, system will wait for a short time, then turn the light off. If the door is
left open, long timeout is active. If the PIR sensor is not activated during that time, light switches off.
Features:
- instant on as soon as door begins to open
- never turn off while somebody is inside
- quickly turns off when everybody is out
Ready light is an
a
dvanced lighting
system, based on motion and door
sensors. It is best suited for closed
spaces that residents don’t occupy
permanently.
17
Features
Patent
rights granted
2016-04-29 by patent
office Slovenia, number
24867, class G06F 9/00.
light and sensor position
short and long timeout
door sensor
long timeout
motion sensor
short timeout
light output
enable ready light
room has a natural light
occupancy status
motion sensor
door sensor
timer
only by night
room enable
