background image

R4Y and R6Y Series A
Operation Manual

I. INTRODUCTION

The Robot Coupe commercial food processor performs a host
of culinary feats.  It is designed for high speed and quality
vegetable processing.  The Robot Coupe will 

chop, grind,

puree, mix, or knead

 using the cutter bowl attachment.

This operators manual is broken down into sections giving
you detailed instructions for assembly and operation of the
continuous feed attachment and the cutter bowl attachment.
Close attention should be paid to all instructions in this manual
to ensure a long life utilization of your food processor.

This manual should be kept within easy access
to all users for reference, and should be read
completely by all first time users of the machine.

Maintaining the food processor in good working condition is
one of the most important measures to be taken.  Inspect the
machine and all parts regularly to make sure they are in good
working condition.

DO NOT operate a machine that has malfunc-
tioned in any way.

Discard any food processed at the time of a mal-
function

 and have the machine inspected and repaired at

one of the Robot Coupe Authorized Service Agencies, a list is
provided in the back of this manual.  Contact one of these
service agencies for all of your service, parts and accessory
requirements.

CAUTION:  Your Robot Coupe comes with a
sharp cutting “S” blade.  Always handle with
safety in mind.  We suggest that a pair of cut-
resistant gloves be worn when handling the “S”
blade.

Machine Specifications:

The Models R4Y and R6Y are equipped with a high speed
motor generating 1 Hp which plugs into a standard 120 volt/
60 Hz, 15 amp power outlet.  The full load amperage rating is
12 amps.  The machines are supplied with a stainless steel
bowl.  The R4Y has a  4 liter bowl and the R6Y has a 6 liter
bowl.  The machines are supplied with S-blade and clear plas-
tic cover.  The machines are equipped with push type on/off
buttons.

I.

INTRODUCTION

II.

ASSEMBLY/DISASSEMBLY
INSTRUCTIONS

III.

OPERATING INSTRUCTIONS

IV.

PREVENTIVE MAINTENANCE
GUIDE

V.

TROUBLE SHOOTING AIDS

VI.

SERVICE AGENCY LISTING

Summary of Contents for R4Y Series A














Reviews: