6
INTRODUCTION TO YOUR
NEW R 100 • R 101 •
R 101 B • R 101 Plus
The R 100, R 101, R 101B and R 101 Plus is a
versatile machine designed to meet your professio-
nal needs. It can perform a number of tasks, as well
as save much in time and labor.
This food processor consists of a bowl assembly and
a vegetable preparation lid that ejects into the bowl.
The 2.5 quart bowl is used for chopping, grinding,
pureeing, blending, mixing, and kneading of ingre-
dients required in most every recipe.
A wide range of cutting plates is available for use
with the vegetable preparation attachment. Cutting
plates are available for slicing, waved slicing, gra-
ting, pulping, and julienne.
Its numerous functions will open the door to a whole
new culinary world.
Thanks to its simple design, all components requi-
ring frequent handling for maintenance or cleaning
can be easily assembled and removed.
All users should read this operation manual before
operating the machine.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTIONS
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
serial number plate.
• CONTROL PANEL
R 100 / R 101
Red switch= Off switch
Green switch = On switch
R 101 B / R 101 Plus
Red switch = Off switch
Green switch = On switch
Black switch = Pulse switch
R 101 Plus also available
with a grey bowl.
ASSEMBLY
• BOWL ATTACHMENT
1) With the motor base
facing you, place the
bowl onto the motor
base with the pin toward
the front. Turn the bowl
just off-center and to the
left as you lower it onto
the base.
3) Place the blade onto
the motor shaft. Rotate
the blade until it drops
into place. The bottom
blade should be level
with, and just off the
bottom of the bowl.
4)
Press the off button
in case the machine
was left turned on.
Place the lid on the bowl
so that the large feed-
hopper is facing you.
Rotate to the right until it
locks.
The machine is now
assembled and ready
for use.
• VEGETABLE PREPARATION ATTACHMENT
Follow the same procedure as for the cutter
attachment for points 1) and 2).
2) Then, turn the bowl
back to the right. The
safety switch pin should
come to a stop at the
front of the motor base.
The bowl, when pro-
perly assembled, should
be just off and level with
the top surface of the
motor base assembly.
This appliance must be plugged into an
grounded socket (risk of electrocution).
W A R N I N G
