8
04/09/2020
e) Standby Mode
If the food processor is not used for more than 10
minutes (motor not operating), the timer goes into
Standby Mode. Standby Mode can be cancelled by
pressing any button or the “on” button.
f) Turning off the timer:
If you do not want to use the timer, you can
deactivate it by pressing the “on” and “off” buttons
at the same time for several seconds.
Repeat the operation to reactivate the timer
function.
ASSEMBLY
1) With the motor base
facing you, position the
cutter bowl on the motor
base.
Turn the bowl to the right
until it locks.
2) Engage the blade on the motor shaft and lower it
right to the bottom of the
bowl.
Make sure that it is
correctly positioned, by
rotating it in the bowl.
• TIMER
How the timer works
The timer has three 7-segment LED displays, two
timer adjustment buttons and a buzzer.
a) Countdown
When the food processor is switched on, the timer
usually displays
0.00
and can be set directly. This
is called Countdown Mode. The timer increments
one second at a time when the motor is operating.
Incrementation stops if the motor stops then
resumes when the motor starts again. In the case of
models Blixer
®
5 V.V. and Blixer
®
7 V.V., the food
processor automatically stops after 9 minutes and
the timer stops. In the case of models Blixer
®
5 and
Blixer
®
7, the food processor automatically stops
after 5 minutes and the timer stops.
b) Timer
Before starting, the user can adjust the processing
time to anywhere between
0.05
(5 seconds) and
9.00
(9 minutes) by pressing the
+
and
−
buttons.
When the motor starts, the timer increments one
second at a time. This is called Timer Mode.
Countdown stops if the motor stops and resumes
when the motor starts again. When the countdown
gets to
0.00
, the processor stops and a buzzer
sounds. The time initially set is then displayed again.
c) Starting the processor with the Pulse button:
If the food processor is started using the Pulse button,
the timer goes into Countdown Mode when the Pulse
button is held down and returns to the previous timer
display when the Pulse button is released.
d) Reset
If the timer displays anything other than
0.00
when
the motor is not operating, the user can reset the
display to zero by pressing the
+
and
−
buttons at
the same time or by pressing the “off” button on the
food processor for 2 seconds.
3) Put the lid equipped
with the Blixer
®
arm on
the bowl (see page 10)
and turn to the right until
locked in place.
The device is now ready
for use.
USES & EXAMPLES
The Blixer
®
will enable your to perform all your
cutting tasks in minimum time, we recommend
therefore, that you keep a close eye on the mixture
in order to obtain the desired results.
HOSPITAL USES
SPOON FEEDING
• Minced foods: meat, fish... • Vegetable purees
• Mousses: vegetables, fish... • Compotes of stewed fruit
SEMI-LIQUID FEEDING
This simply entails diluting spoon-feeding preparations:
• Minced meat + gravy
• Puree + liquid (broth, milk...)
• Soups / creamed soups • Fruit co syrup or water
LIQUID FEEDING (for use via tubes)
• Soups and any preparations that can be liquidized.
RESTAURANTS AND DELICATESSEN USES
• Butter mixtures: snail butter, salmon butter, anchovie
butter…
• Sauces: green sauce, mayonnaise, remoulade, ailloli,
emulsify sauces with tomatoes, cream, parsley…
• Grinding: lobster, scampi, seashells....
