Robopac ROTOPLAT 108-308-508-708 Use And Maintenance Manual Download Page 65

Page: 65 / 121

INFORMATION ON HANDLING AND INSTALLATION

ENG

4.6. MACHINE FIXING

Once the units have been assembled and levels, squaring, parallelism and orthogonality have been checked, it is

necessary to fix the machine body to the floor.

Depending on the floor type, it may be necessary, before laying the machine, to lay foundations in correspondence of

the various supporting legs.

Laying the foundations and fixing the machine is essential to ensuring the machine stability and functionality.

Important

Should it be necessary, insert metal pates (A) between the screws and the floor.

Rotoplat 308-508-708

Rotoplat LP 308-508-708

Rotoplat TP3 308-508-708

Summary of Contents for ROTOPLAT 108-308-508-708


























































































































Search results

Summary of Contents for ROTOPLAT 108-308-508-708

Reviews:

Related manuals for ROTOPLAT 108-308-508-708

Brands by name

Popular brands

Robopac ROTOPLAT 108-308-508-708, Use And Maintenance Manual

Search results

Summary of Contents for ROTOPLAT 108-308-508-708

Reviews:

Related manuals for ROTOPLAT 108-308-508-708

Brands by name

Popular brands