3. Speaker Port
Used to connect to the speaker.
4. Autonomous Program Button
Scratch programs written by the user can be set as autonomous programs, which can be loaded directly onto the EP Core. Press
the Autonomous Program Button to run the program.
5. Antennas
For optimal Wi-Fi connection, set the intelligent controller antennas at 90
°
.
6. Reserved Port
Unused port.
7. CAN Bus Port
8. Micro USB Port
Used to connect to the computer.
9. Connect Mode Switch
Used to switch between connecting via Wi-Fi or a router.
10. Connect Button
The connect button functions differently when connecting via Wi-Fi or router.
Connection to Wi-Fi: Once the Wi-Fi password is forgotten, press and hold this button for five seconds to reset the Wi-Fi
password.
Connection to Router: When scanning the QR code with the EP Core to join a network, press this button first.
⚫
DO NOT pull on the antenna.
⚫
If the intelligent controller antenna is damaged, the performance of the EP Core will be affected. Contact
DJI if the antenna is damaged.
Camera
Designed for
EP Core
robots, the
EP Core
camera features a 1/4-inch sensor with 5 million pixels and a FOV of 120
°
, allowing
users to control the
EP Core
from a first-person perspective.
Clean the lens regularly to avoid blurring or halos. Use a special lens cleaner to make sure that there is no foreign matter on the
lens after cleaning and that it does not damage the lens.
Speaker
The
EP Core
speaker is compatible with a 2.5 mm device with a power rating of 2 W. The speaker provides users with a more
immersive experience with sound effects such as when the
EP Core
launches gel beads or is hit by another
EP Core
.
Operating Your EP Core
Checking Before Use
Check the following each time you use the
EP Core
:
1. Make sure the motion controller is properly installed, all cables are connected, and the screws on the chassis rear cover are
tightened.
2. Make sure the intelligent controller, blaster, camera, and speaker are connected.
3. Make sure the microSD card is inserted.
4. Make sure the intelligent battery is fully charged and properly inserted.
5. For optimal Wi-Fi connection, set the intelligent controller antennas at 90
°
.
Operating the EP Core Using a Mobile Device
It is recommended to use the
EP Core
on flat surfaces such as wooden floors and carpets. Uneven surfaces such as sand or
rocks may damage the wheels or motors.
Specifications
RoboMaster EP Core
Chassis Speed Range
0-3.5 m/s (forward)
0-2.5 m/s (backward)
0-2.8 m/s (sideward)
Max Chassis Rotational Speed
600
°
/s
Intelligent Controller
Latency
[1]
Connection via Wi-Fi: 80-100 ms
Connection via Router: 100-120 ms (unobstructed, free of
interference)
Live View Quality
720p/30fps
Operating Frequency
2.4 GHz
，
5.1 GHz
[2]
，
5.8 GHz
