Powering On the EP Core
Follow the steps below to power on the robot:
1. Press the rear armor release button to open the chassis rear armor.
2. Install the intelligent battery into the battery compartment.
3. Press and hold the power button to turn on the battery.
4. Close the chassis rear armor.
Connecting the EP Core and the App
The EP Core must be connected to the RoboMaster app in order to use. Users can learn how to connect via Wi-Fi or via a router
in the Connection Mode page. Follow the prompts to connect the EP Core to the app. Refer to the Connecting section for more
information.
Initializing the EP Core with the App
Activating the EP Core
After connecting, use your DJI account to activate the EP Core in the RoboMaster app. Activation requires an internet connection.
Using the RoboMaster App
With the dedicated RoboMaster app, users can access rich educational resources and several gameplay modes. The app can be
used with a touchscreen or a gamepad and is available on iOS, Android, Windows and Mac. Users on different platforms can
even play together at the same time. Users can also write programs easily and apply them or share with friends instantly using the
RoboMaster app. This section uses the RoboMaster app on iOS as an example. The specific interface may vary depending on the
device used.
Omnidirectional Chassis
The EP Core chassis is an omnidirectional motion platform based on the Mecanum wheels, which can be used to move forward,
