3
EN
damage.
5. Take measures to protect the Board Type A from static
electricity and physical damage.
6. Always keep the Board Type A clean otherwise a short-
circuit may occur and the Board Type A's performance may
be negatively affected.
7. DO NOT use your hand to touch the chips on the Board
Type A as doing so may damage the Board Type A and
its performance may be negatively affected due to static
electricity.
8. If you detect any flames, smoke, strange smells, or other
abnormality disconnect the Board Type A from the power
source immediately.
Introduction
The RoboMaster Development Board Type A is a highly
flexible controller board designed to be used in a wide
range of robotics projects. It uses an STM32F427IIH6 as
its main controller chip and features multiple extension and
communication interfaces. It is compatible with the RoboMaster
M3508 and M2006 Brushless DC Gear Motors, the RoboMaster
UWB Locating System, the DJI Onboard SDK, and the DJI
Manifold high-performance embedded computer.
In the Box
Board Type A × 1
SWD Cable × 1
Power Cable × 1
2-Pin CAN Cable × 1
