2
EN
Disclaimer
Thank you for purchasing the ROBOMASTER™ Development
Board Type A (hereinafter referred to as “Board Type A”).
Read this disclaimer carefully before using this product. By
using this product, you hereby agree to this disclaimer and
signify that you have read it fully. Install and use this product in
strict accordance with this User Guide. SZ DJI TECHNOLOGY
CO., LTD. and its affiliated companies assume no liability for
damage(s) or injuries incurred directly or indirectly from using,
installing or modifying this product improperly, including but
not limited to using non-designated accessories.
DJI™ and ROBOMASTER are trademarks of SZ DJI
TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its
affiliated companies. Names of products, brands, etc.,
appearing in this document are trademarks or registered
trademarks of their respective owner companies. This product
and document are copyrighted by DJI with all rights reserved.
No part of this product or document shall be reproduced in any
form without the prior written consent or authorization of DJI.
The final interpretation right of this disclaimer is reserved by
DJI.
Warning
1. Visit the RoboMaster official website and download the
RoboMaster Development Boards User Manual before use.
Read and understand the whole manual, and then strictly
follow the instructions in the manual when using the Board
Type A.
2. Connect the cables correctly by following the instructions
in the
RoboMaster Development Boards User Manual
otherwise the connectors and the Board Type A may get
seriously damaged.
3. Make sure there are no short-circuits and all the cables are
in good condition. DO NOT use cables that have been
damaged in any way.
4. Be sure to use the product in strict accordance with the
specifications (including those for voltage, current, and
temperature) listed in this document. Failure to do so may
reduce the product service life or even lead to permanent
