tm2605 Jan-20
10
3. Technical maintenance
The maintenance purpose is to keep the machine operable during the entire
service life. The recommended
3
maintenance schedule with types of actions is
presented below:
PROCEDURE
PERIOD
Kettle cleaning
once a day
Outer surface cleaning
once a day
DISCONNECT THE MACHINE FROM THE MAINS BEFORE TECHNICAL MAINTENANCE!
DO NOT USE SHARP TOOLS OR ABRASIVES!
DO NOT LET ALL WATER TO BOIL OUT!
DO NOT PUT MORE THAN 2 LITERS OF WATER INTO THE KETTLE!
DO NOT REMOVE THE LID WHILE KETTLE IS HOT!
HOT STEAM INSIDE! BURN HAZARD!
Kettle cleaning
4
Pour
not more than
2 liters of water in the kettle, close the kettle with lid
provided in the delivery set, and turn the main switch in ON position. Wait until
water is started to boil; let it boil for a few minutes, so hot water steam will be
able to fill the kettle properly. Turn off the machine and let the kettle to cool
down.
In case of severe carbon build ups, use special cleaning product (Heet-N-Kleen
or similar).
DURING MACHINE OPERATION SOME AMOUNT OF DARK-COLOURED
CONDENSATE MAY BE FOUND BELOW THE KETTLE, ON MIXER MOTOR
HOUSING AND AROUND. IT SHOULD BE REMOVED AS NECESSARY!
3
Period may be different. Maintenance procedures must be done as necessary.
4
The machine must be turned on for kettle cleaning procedure.