COTTON CANDY MACHINE ACB-09E
REVISED 28-Sep-17
17
Ending the operation
To end the operation, it is not necessary to process all sugar in the
spinning head. If you need short-time break, you can make it with any
amount of sugar in the head.
Turn off the heating with switch (12) and let the head spin for 5-7 minutes
without heating. In the beginning, first 20-30 seconds, after turning heating
off, the machine keeps produce some amount of sugar flakes and dust, so
it is recommended to use ‘No-Snow’ tool or similar appliance.
After 5-7 minutes, turn off the machine with switch (11) and wait until
complete stop. If you work outdoors, you can put paper or plastic bag on
the spinning head to protect sugar from dust, insects or foreign particles
ingression. Before putting the bag on, make sure that the head is cool
enough.
If you want to make a long break (few days or more), it is recommended to
do complete cleaning of the spinning head. After ending the operation,
remove all rest sugar from the head, you can do this by turning machine
upside down. After then, it is required to do technical maintenance: wipe
the machine’s housing with damp cloth, wash silicone rings and plastic pan
with warm soapsuds, and clean the diffuser from sugar (see below).
During transportation always secure the baseplate with special fastening
nuts. It will prevent possible damage of the machine and prolong the
lifetime.
