RoboBuilder RQ PLUS 110, Manual

Page: 20 / 200

22
Smart controller X1
1×5 frame X4
3×7 frame X4
2×5 L frame X2
Spacer X2 2s rivet X16 3s rivet X2 Double rivet X98
3×5 L frame X4 3×6 L frame X4 Ball frame X2 Wheel X2 Rubber ring X2
3×9 frame X1 5×5 frame X2 3×8 slide frame X2 2×4 L frame X4
1×8 frame X3 1×12 frame X2 2×5 frame X2 3×5 frame X4
R. motor (ID29,30) X2 Battery case X1 LED X1 Touch sensor X1
ID30
Connect to the
bottom port,
and is used as
left wheel. ID29
Connect to the upper
port, and is used as
right wheel.
Robot Assembly
Prepare robot parts.
Tips.
Punching Bot uses two rotation motors to go forward, backward and rotate.
Rotation motor ID29 is connected to the upper port while ID30 is connected to
the bottom. ID29 is connected to right wheel and ID30 is connected to the left
to go forward and backward properly.