4
4.
Installing the Light generator
1. Mount the Ø9/Ø28 adapter on the harness common end.
2. Secure the set screw with the supplied allen key.
3. Insert the harness' common end fully into the light port on the light generator.
4. Tighten the finger screw at the light port.
5. Close the lid and tighten the finger screw.
6. Se to that the requirements of installation and ventilation are met.
7. Connect the supply cord to the main power supply.
(If you are using a Ø28 harness, please disregard 1 and 2.)
5.
Fixating the light generator to the surface
1. Loosen the finger screw at the top of the light generator to open the lid.
2. Be careful not to damage the lamp. Remove it if necessary.
3. Mount the light generator with one or two screws (not included)
through the holes beside the lamp.
4. Refit the lamp and close the lid again.