ROBLIN Creatix Series, Instructions For Use Manual

Page: 22 / 84

EN
2
22
Fitting the hood body
• Open the doors/the door (See section Open Panels).
• Remove the Metal grease filters using the handles
provided.
• Adjust the two screws Vr , in the brackets 11a, so that
they are at the start of their travel.
• Hook the hood body to the two brackets 11a .
• From the inside of the hood body, turn screws Vr to
level the hood body itself.
• Fasten the safety screw 12a .
• Close the doors/the door again.
12a
Vr
11a
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to
the chimney using either a flexible or rigid pipe the
choice of which is left to the installer.
To install a ø 150
• To install the dumper 10 ø 150.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Remove any activated charcoal filters.
10
ø 150