Expert
LD 45
Picture B
Charging connection
Balance wiring diagramm
The display now shows the number of cells
– on the left, there’s the automatically re-
cognized cell count (R), and on the left,
there’s the cell count set by you. If both
values match, you may start charging with
pressing
Enter
Start
.
If the values displayed do not match, press
Mode
Stop
to return to the previous menu and re-
set the cell count if necessary.
You can directly skip this check during di-
scharging and while using the BALANCE/
CHARGE program.
The display now shows various parameters.
You can stop the process by pressing
Mode
Stop
.
The display explained:
1) cell count
2) charge/discharge mode (CHG = charging
without balancer, BAL = charging with
balancer, FAS = fast charge, STO = storage
mode, DSC = discharging)
3) elapsed time
4) charge/discharge current
5) battery voltage
6) charged/discharged capacity
10.3.1 Starting the charge/discharge process: After you’ve checked your settings,
press and hold
Enter
Start
for more that 2 seconds.
Mode
Stop
Mode
Stop
Enter
Start
Enter
Start
Enter
Start
>2S
>2S
1
2
3 4
5
6
10
Summary of Contents for EXPERT LD 45
Page 1: ...Operating manual Bedienungsanleitung www robitronic com LD 45...
Page 16: ...Expert LD 45 16...
Page 31: ...Expert LD 45 31...
