5.
Fit the trim to the fire by hooking it over the top of the firebox
top. Refer to Fig 25.
6.
The bottom of the trim is held in place with magnets. Push
the bottom of the trim at each side onto the magnets.
NOTE: If the magnet on either side came away with the
trim on removal, transfer it back to the “bump” on the fire
before re-fitting the trim. Refer to Fig 26.
7.
Position the fender centrally and slide towards the fire until
it touches the base coal. Refer to Fig 27.
18
18
Fig 25.
Fig 27.
Fig 26.
TRIM MAGNET
Summary of Contents for 32-170-23
Page 24: ...11 0 NOTEPAD 24 24 ...
Page 25: ...11 0 NOTEPAD 25 25 ...
