background image

 

 

7

 

 

Safety

 

 

 

Warning:

 

When using electrical appliances, basic precautions should always be followed, including the 
following: 

 

Do not disassemble, refit or repair the waste disposal by yourself. 
The appliance must be installed so that reset buttons and reversing switches are readily accessible

 

To reduce risk of injury. Close supervision is necessary when the appliance is used near children. 

 

Do not put fingers or hands into the waste disposal unit. 

 Switch off or unplug the appliance before attempting to free a jammed rotor with an  
 implement. 
Turn the power switch to the off position before attempting to clear a jam or remove an object 
from the disposer. 
When attempting to loosen a jam in the waste disposal use the hexagonal wrench 
provided. See operating instructions for further details. 
When attempting to remove objects from the waste disposal use long handed tongs or pliers. 
When the waste disposal is not in use, leave the sink drain plug in place to reduce the risk of 
Objects falling into the disposer. 
The appliance must be installed so that the reset button is readily accessible. 

            

Do not use hot water when grinding food waste. Cold water helps in solidifying the waste,  

            allowing the disposer to effectively grind the waste. 

This appliance is not intended for use by young children or infirm persons unless they have 
been adequately supervised by a responsible person to ensure that they can use the 
appliance safely. 
Young children should be supervised to ensure that they do not play with the product. 
Your Robinhood Waste Disposal is designed for grinding food waste only. Do not attempt to 
grind the following: 

Metal: Silverware, nails, tacks wire, bread bad ties, staples. 

Glass: Jars, bottles, pieces of pottery or crockery. 

Dye or drain cleaning chemicals. 

Excessive quantities of fat or grease. 

 

 

With proper use and care your Robinhood Waste Disposal will provide you with many years of trouble free 
service. 

 

 

 

 

 

Product Approvals and Ratings

 

 

 

 

 

 

Product approval 
number

 

 

Spectrum Test report Number 4320

 

 

Product rating

 

390W (1.49A) Max at 240V 50Hz

 

520W (2.16A) Max at 240V 50Hz

 

/Electric approval

 

AS/NZS

 

 

AS/NZS 60335.2.16:2006

 

EMC AS/NZS

 

CISPR14:2003

 

Summary of Contents for SE390









Reviews: