Robin Robin 800, User Manual, Page: 7 / 41

7
3.2 Installing the top hat
Disconnect the fixture from mains before top hat installation
1.
Go to the fixture menu and set reduced tilt movement (Personality --> Pan/Tilt Setting-->
Tilt Movement Range --> reduced).
2
.Place the top hat on the head, press locks (1) and turn the top hat counter-clockwise until it snap into slots
in the flange.
3.3 Installing the front clear transparent cover
Uninstallation of the beam shaper
1. Disconnect fixture from the mains.
2. Press and hold both locks (1) and turn the beam shaper module (2) clockwise until three pins (3)
are loosen from slots (4).
3. Remove the beam shaper module (2) from the fixture head.
4. Connect fixture to the mains.