Robin Robin 800, User Manual, Page: 32 / 41

3
Accessories
Omega holder (P/N.99010420).........................................................2 pcs
Front clear transparent cover (P/N. 99013603..................................1 pc
Optional accessories
Top hat-black (No.10980101)
Top hat-white (No.10980103)
Top hat-silver (No.10980111)
Mounting adapter for one Omega holder in black (No.10980100)
Mounting adapter for one Omega holder in neutral - glazy aluminium (No.10980113)
Beam shaper module 19°x35 ° (No.10980142)
EggCrate Robin 800 LEDWash-black (No. 10980199)
11. Maintenance and cleaning
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build
up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should alcohol or solvents be used!
DANGER !
Disconnect from the mains before starting any
maintenance work
The head´s transparent cover will require weekly cleaning as smoke-fluid tends to building up residues, reduc -
ing the light-output very quickly. The cooling fans should be cleaned monthly.
The interior of the base should be cleaned at least annually using a vacuum-cleaner or an air-jet.
More complicated maintenance and service operations are only to be carried out by authorized distributors.
11.1 Replacing fuse
IOnly replace the fuse by a fuse of the same type and rating.
Before replacing the fuse, unplug mains lead!
If you need to replace the main fuse, follow the instrustions:
1) Remove the rear cover of the base by unscrewing 6 fastening screws.
2) Remove the old fuse from the fuseholder.
3) Install the new fuse into the fuseholder.
4) Replace the rear cover back to the base.
Mounting adapter for
one Omega holder