Robin Robin 300 plasma spot, User Manual, Page: 20 / 35

0
. Module M - A pan/Tilt processor on the main board in the fixture arm
. Module C1 - A strobe/magenta/yellow processor on the board in the fixture head.
. .
Module C2
- A Cyan/CTO processor on the board in the fixture arm.
Module I
- A rot. gobo/stat. gobo/iris processor on the board in the fixture arm
. .
Module O
- A focus/zoom/prism/frost/ processor on the board in the fixture arm.
View Logs
. - Use this menu to read fixture´s data which have been recorded during fixture operation. This
colected data allows easier troubleshooting. . .
...
Fixture Errors
. - Use this menu to read fixture errors which have occured during fixture operation.
There is a list of error folders:
Pan Errors Prism Errors
Tilt Errors Prism Rotation Errors
Dimmer 1 Errors Frost Errors
Dimmer 2 Errors Cyan Errors
Colour Errors Magenta Errors
Gobo Errors Yellow Errors
Gobo Carousel Errors CTO Errors
Static Gobo Errors Clean Air Filters
Iris Errors Overheated
Focus Errors Lamp Errors
Zoom Errors Temp. Sensor Errors
. . . . . . .
...
Fixture Status
. - Recorded following actions: Fixture On, Fixture Off, Lamp On, Lamp Off.
...
Fixture Position
. - Recorded installation positions of the fixture:
...
Fixture Temperatures
. - Recorded temperatures which have exceeded defined levels.
Note: The log buffer can contain 8000 records max. If the buffer is full, old data will be overwritten.
.
7.3 Bookmark "Personality"
User mode
- The Robin 300 Plasma Spot allows you to recall up to 3 user settings. After switching the fixture
on for the first time, the User A settings is active. Now all changes made in the “Personality” menu , ”Address -
ing” menu and the “Music Trigger“ and “ Preset Playback“ items from the “Stand-alone” menu are saved to
the User A settings. If you now select the User B settings, from this moment the changes made in these menus
will be saved to the User B settings. After switching the fixture off and on, the User B setting is active. In this
way you may use the 3 fixture operating behaviours.
... User A Settings - the function recalls the user A settings.
... User B Settings - the function recalls the user B settings.
... User C Settings - the function recalls the user C settings.
DMX Preset - Use the menu to select desired channel mode.
...
Mode 1
- 31 control channels
...
Mode 2
- 24 control channels
...
Mode 3
- 22 control channels
...
View Selected Preset
- Use the menu to display channels included in the selected mode.
Pan/Tilt Settings
- Use the menu set behaviour of both pan and tilt movements.
...
Pan Reverse
- The item allows to invert pan movement.
... Tilt Reverse - The item allows to invert tilt movement.