manualshive.com logo in svg

Robin Robin 300 plasma spot, User Manual, Page: 2 / 35

Share
Download
Robin Robin 300 plasma spot User Manual Download Page 2

Table of contents

1. Safety instructions ......................................................................................................... 3
2. Operating determination ................................................................................................ 4
3. Fixture exterior view ...................................................................................................... 5
4. Installation.......................................................................................................................6

4.1 Placing the fixture head covers 

.................................................................................. 6

4.2 Connection to the mains

............................................................................................. 6

4.3 Replacing the colour filters and gobos 

....................................................................... 6

4.4 Rigging the fixture

....................................................................................................... 8

4.5 DMX-512 connection

................................................................................................. 0

4.6 Ethernet connection

.................................................................................................. 

5. Remotely controllable functions ................................................................................. 13
6. Control menu map ........................................................................................................ 14
7. Control menu  ...............................................................................................................17

7.1 Bookmark " Address"

................................................................................................ 8

7.2 Bookmark "Information"

............................................................................................ 8

7.3 Bookmark "Personality"

............................................................................................. 0

7.4 Bookmark "Manual Control"

...................................................................................... 

7.5 Bookmark "Stand-alone"

........................................................................................... 

7.6 Bookmark "Service"

.................................................................................................. 3

7.7 Icon "Lamp menu"

..................................................................................................... 5

8. RDM ...............................................................................................................................25
9. Error and information messages ................................................................................ 26

10. Technical Specifications

............................................................................................ 27

11. Maintenance and cleaning ......................................................................................... 29

Robin 300 Spot

Summary of Contents for Robin 300 plasma spot




































Reviews:

No comments