4
Magenta Correction
- You can choose betwen deep tone of the magenta colour filter (On) or pale tone of the
magenta colour filter (Off).
Date & Time Settings
- Use this menu to set current date and time for the fixture log system (menu "
View
Logs
"). Set this menu item before first fixture operation.
Unlink Wireless Adapter
- The menu serves for unlinking the fixture from the transmitter (only WDMX ver
-
sion)
Default Settings
- The menu item allows to set all fixture parameters to the default (factory) values.
7.4 Tab "Manual Control"
Reset Functions
- The menu allows to reset the fixture either per function modules or all modules together.
Total Reset
- The item resets all function modules.
Pan/Tilt Reset
- The item resets a pan and tilt movement.
Colour System Reset
- The item resets a colour wheel and CMY/CTO flags.
Gobo System Reset
- The item resets a static/rotating gobo wheel.
Strobe/Hot-Spot Reset
- The item resets strobe lamellas and a hot-spot module.
Optics/Prism/Frost Res.
- The item resets a zoom, focus, prism and a frost module.
Iris Reset
- The item resets an iris module.
Preset Effect Control
- Use the menu to show preset positions of each channel effect.
Manual Effect control
-
Use the menu to control all fixture channels by means of the control panel.
7.5 Tab "Stand-alone"
Test Sequences
-
Use the menu to run a test/demo sequences without an external controller, which will show
you some possibilities of using Robin 300ESpot.
Dynamic Mode
- This mode uses all Robin 300ESpot functions including pan/tilt movement and therefore
is good for a complete introduction of the fixture.
Static Mode
- This mode is suitable for projections on the wall, ceiling or ground without any pan/tilt move
-
ment. Adjust the pan, tilt, zoom, focus and hot-spot to desired positions an start test sequences by touching
the green icon.
Music Trigger
- Use the item to activate the sound control of the running program via the built-in micro
-
phone.
Preset Playback
- This menu allows you to select the program which will be played in a loop after switching
the fixture on (the option is commonly used in a stand-alone operation without an external controller).
None
- The option disables “Presetting playback” function.
Test
- The option starts the test sequences.
Prog. 1
- The option starts user program No. .
Prog. 2
- The option starts user program No. .
Prog. 3
- The option starts user program No. 3.
Play program
- Use the menu to run desired program in a loop.
Play Program 1
- The option starts user program No..
Play Program 2
- The option starts user program No. .
Play Program 3
- The option starts user program No. 3.
Edit Program
- Use the menu to create or to edit desired program. The Robin 300ESpot offers 3 free programs,
Summary of Contents for 300E Spot
