- 37 -
-2: Hold up the reel gradually and slowly and
remove it from the case.
-3: If the spring in the reel likes to jump out,
redo the steps of (3)-1 and (3)-2 again.
WARNING
Do not drop nor shake the reel. Put it on a level table because the spring is set in the
disassembled reel.
Disassembly is completed.
WARNING
Before starting the assembly, make sure to wear the protective glasses.
10-1-2 ASSEMBLY STEPS
(1) Setting the reel into the case.
-1: Apply grease to the case. (Fig.10-3)
-2: Adjust the position of the inner end of the
spring, which is set in the reel. (Fig.10-3)
-3: Hold the reel so that the hook and the inner
end of the spring are hooked together.
Set the reel gently from the above into the
case.
-4: Move the reel slightly counter-clockwise and
make sure the spring is hooked.
(2) Assemble the component parts.
-1: Set the latchet into the reel. (Fig.10-4)
Fig. 10-3
Grease
Hook
The end of the spring touches
the rib of the bearing.
Fig. 10-4
Set the latchet to the close-position
