7
To begin selecting days for the copy program, use
and
to
highlight each day of the week. If the highlighted day should use the
same schedule, press SELECT to turn on that day. Once all the days that
will use this schedule are selected, press EDIT SCHEDULE. The settings
will be copied to the selected days.
If there are more days to program, the next unprogrammed day will be
blinking. Repeat the steps above until all days have been programmed.
When finished press START/STOP SCHEDULE or wait 30 seconds and the
thermostat will return to operation.
ChangingtheUserSettings
When
and
are pressed at the same time the thermostat will
display the current settings in order.
To change any setting:
When the setting is visible and flashing press the
or
arrows
to adjust the number on the screen.
To exit the changes and save:
Press START/STOP SCHEDULE. The thermostat will return
to operation.
SCAL = Scale in °F (Fahrenheit) or °C (Celsius).
CLOC = Set clock to 12 or 24 hour format.
LITE = Display backlight always on ”y” or off ”n”. Also called the
nightlight feature. If the thermostat has been wired with 24V AC (R
and C terminals) then this feature will be displayed and the setting
can be changed.
Summary of Contents for RS6000
Page 15: ...15 NOTES...