Roberts WM-202 Manual Download

Page: 73 / 76

If you need any further advice, please call our Technical Helpline on 1300 556 816

Specifi cations

Power Requirements

Mains

240 volts AC, 50Hz

only

(use only supplied adaptor)

Batteries

6 x LR20 D size

Battery Life

30 - 35 hours approximately (using

alkaline cells, listening 4 hours a day)

Connectivity

Wired Ethernet

10M bits/sec via RJ-45

WiFi

802.11b and 802.11g supported with

WEP and WPA/WPA2 encryption

Compatible with 802.11n routers which

offer mixed mode support for 802.11b/g

Circuit features

Loudspeaker

2 x 79 mm

Output Power

3 Watts RMS per channel

Headphone socket

3.5mm dia

Aux In socket

3.5mm dia

Aerial System

WiFi

Built-in antenna

DAB+

Telescopic aerial

Cautions

Do not allow your radio to be exposed to water, steam or sand.
Do not leave your radio where excessive heat could cause damage.
The name plate is located on the rear of the radio.

The Company reserves the right to amend the specifi cation without notice.

• The radio shall not be exposed to dripping or splashing and no objects

fi lled with liquids, such as vases, shall be placed on the radio.

• It is recommended to operate the product such that there is a minimum

distance (10cm recommended) to adjacent objects in order to ensure

good ventilation.

• The ventilation of the product should not be restricted by covering it

with items such as newspapers, tablecloths, curtains etc.

• No naked fl ame sources such as lighted candles should be placed on

the product.

• It is recommended to avoid using or storing the product at extremes

of temperature. Avoid leaving the unit in cars, on window sills, in direct

sunlight etc.

• The radio must be used in a moderate climate.

Information

Summary of Contents for WM-202













































































Search results

Summary of Contents for WM-202

Reviews:

Related manuals for WM-202

Brands by name

Popular brands

Roberts WM-202, Manual

Search results

Summary of Contents for WM-202

Reviews:

Related manuals for WM-202

Brands by name

Popular brands