Roberts WM-202 Manual Download

Page: 55 / 76

If you need any further advice, please call our Technical Helpline on 1300 556 816

Presetting stations - DAB+ and FM radio

There are 5 memory presets each for DAB+, FM and Internet radio. They

are used in the same way for each operating mode.

1. Press the

On/Off

button to switch on your radio.

2. Tune to the required radio station as previously described.

3. To store the station as a preset, press and hold the required

Preset

button

(1 - 5) until the display shows 'Preset stored'. The station will

be stored under the chosen preset button. Repeat this procedure as

needed for the remaining presets.

4. Stations which are already stored in the presets may be over written

by following the above procedure.

Note: All the radio station presets are preserved in memory when the radio

is switched off, even if there are no batteries installed.

Recalling a preset - DAB+ and FM radio

1. Press the

On/Off

button to switch on your radio.

2. Select the required operating mode using the

Mode

button.

3. Momentarily press the required

Preset

button. Your radio will then tune

to the station stored in preset memory. The chosen preset number is

shown in the lower area of the radio display, e.g. 'P2'.

FM Radio

Summary of Contents for WM-202













































































Search results

Summary of Contents for WM-202

Reviews:

Related manuals for WM-202

Brands by name

Popular brands

Roberts WM-202, Manual

Search results

Summary of Contents for WM-202

Reviews:

Related manuals for WM-202

Brands by name

Popular brands