Roberts Stream 67 Page 84 Instruction Manual Download

Page: 84 / 92

Software version display

The software version display is provided for reference and customer support purposes.
1. Press

Menu

. Choose

'System settings'

and then

'Info'

. The display will show

the software version and radio ID. Press

Menu Up

Down

to display further

information.

2. Press

Menu

to exit.

Audio FAQ

Your audio system can access some audio help for Internet Radio use.
1. With your audio system switched on and in

Internet Radio

mode, press

Menu

Choose

'Station list'

and then

'Help'

to enter the Help menu.

2. Select

'FAQ'

to display some frequently asked questions.

3. Choose a question that suits your requirements. Adjust the volume as needed.

SW version:

ir-mmi-FS2026-0500-06

41_V2.13.4c.EX70052-1A

Spotify version:

0.1.2.3-abcde7a35

Info

0.1.2.3-abcde7a35

Radio ID:

012345A12A1B

Friendly Name:

Roberts Revival Stream 67 0012

34a12a1a

Info

Factory Reset

Software update

Setup wizard

Info

Multi-room

Subwoofer

System settings

1. Press

Menu

and choose

'System settings'

'Network'

and then

'View settings'

. The current

network settings will be displayed.

2. Press

Menu Up

Down

until the IP address is showing on the display. This is the local

IP address used by your audio system on your network. In the example screen to the

right the IP address is 192.168.1.27. Make a note of the IP address shown on your audio

system's display for the next stage.

3. Ensure that your computer is on the same network as the audio system. On your computer

enter the IP address noted above into the address bar of your web browser. For example,

enter 192.168.1.27 followed by Return. This will allow you to view some of the audio

systems settings and will allow you to change the friendly name. Type the new name in

the box as shown and then click Apply to save the name. The new Friendly Name will now

be visible to network connected devices.

Friendly name

Your audio system uses a Friendly Name so that it is identifiable within remote control software such as the UNDOK app, UPnP server and control

software, and the Spotify app. By default, your audio system's Friendly Name will be shown as the "Roberts Stream 67" followed by a 12 digit

alphanumeric code which is the network MAC address that is unique to your audio system. If you would like to change this name to something more

personalised you may either use the UNDOK app or follow the instructions below.

View settings

DHCP enable

SSID:

Julia S

IP address:

192.168.1.27

Subnet mask:

DAB

Summary of Contents for Stream 67





























































































Search results

Summary of Contents for Stream 67

Reviews:

Related manuals for Stream 67

Brands by name

Popular brands

Roberts Stream 67, Instruction Manual

Search results

Summary of Contents for Stream 67

Reviews:

Related manuals for Stream 67

Brands by name

Popular brands