27
DAB
Display backlight
The brightness of the display can be adjusted for when the radio is in use. If you
use the unit in the bedroom, you may prefer a lower brightness level than the
standard setting. There a range of brightness levels from which to choose and
there is also a timer which can be set to dim the backlight after a preset time.
To change the current brightness setting, follow the steps below.
1. Press and release the
On/Off
button to switch on your radio.
2.
Press and hold
the
Info / Menu
button. The DAB menu will show on the
display.
3. Press
the
Tuning Up
or
Down
buttons until
'SYSTEM'
appears on the display.
Press and release the
Select
button.
4. Press
the
Tuning Up
or
Down
buttons until
'BACKLITE'
appears on the
display. Press and release the
Select
button.
5. In the backlight menu you may adjust the following settings using the
Tuning
Up
or
Down
and
Select
buttons.
Time out:
The backlight display can be set to remain bright or to dim after a
set time between 10 and 180 seconds.
On level:
To adjust the brightness while the controls are being used, the On
level can be set to high, medium or low.
Dim level:
To adjust the brightness after a preset time has elapsed, the Dim
level can be set to high, medium or low.
When the Dim backlight setting is in use pressing any button will switch the
radio to the 'On level' brightness for a few seconds. This is so that even if the
'Dim level' is set low, it is still possible to see the time when needed.
1
2
DAB
DAB
DAB
DAB
DAB
Summary of Contents for SPLASH MINI
Page 34: ...33 Notes ...
