Operating your radio - FM
1. Carefully plug
into your iPod docking connector checking that the
connector is correctly aligned (see Connecting to your iPod, page 25). Plug
the headphones into
. The headphones and the iPod lead act as the radio
aerial and so the cables should be unravelled for good radio reception.
2. Your iPod may power up when
is connected. If not, press and hold the
Play / Pause
button on
to switch on your iPod.
will then power
up after 2 - 3 seconds. The display will show ‘Welcome’ and then
will
enter the last used mode (or DAB mode if this is the first time that
is
used).
3. If necessary, press and release the
Mode
button until FM mode is selected.
will display the currently tuned FM frequency or station name - for
example, 87.5MHz.
4. Press and hold the
Next
button.
will scan upwards from the currently
displayed frequency and will stop scanning when an FM signal is found.
15
