Operating your radio - DAB
1. Carefully plug
into your iPod docking connector checking that the
connector is correctly aligned (see Connecting to your iPod, page 25). Plug
the headphones into
. The headphone and iPod leads act as the radio
aerial and so the cables should be unravelled for good radio reception.
2. Your iPod may power up when
is connected. If not, press and hold the
Play / Pause
button on
to switch on your iPod.
will then power
up after 2 - 3 seconds. The display will show ‘Welcome’ and then
will
enter the last used mode (or DAB mode if this is the first time that
is
used).
3. If necessary, press and release the
Mode
button until DAB mode is
selected.
4. If the stored list of radio stations is empty then
will scan for DAB radio
stations, displaying ‘Scan 5A’, ‘Scan 5B’, ‘Scan 5C’, and so on as the scan
progresses. As new stations are found
will display ‘Found’ and the total
number of DAB radio stations found during the scan.
9
