Roberts Revival iStream2 Manual Download Page 86

Page: 86 / 100

Line out socket (3.5mm Jack)

A 3.5mm stereo

Line Out

socket

located on the rear of your radio is

provided for connecting the audio signal to an external ampli

er. Inserting

an audio cable into this socket will not mute the internal loudspeaker. Set
the volume control on the radio to minimum if desired.

Headphone socket

A 3.5mm stereo

Headphone Socket

located on the top left hand corner

of your radio is provided for use with headphones. Inserting a plug
automatically mutes the internal loudspeaker.

Please be aware that the sensitivity of headphones can vary widely. We
therefore recommend setting the volume to a low level before connecting
headphones to the radio.

IMPORTANT:

Excessive sound pressure from earphones and headphones

can cause hearing loss.

To prevent possible hearing damage, do not listen at high
volume levels for long periods.

Summary of Contents for Revival iStream2





































































































Search results

Summary of Contents for Revival iStream2

Reviews:

Related manuals for Revival iStream2

Brands by name

Popular brands

Roberts Revival iStream2, Manual

Search results

Summary of Contents for Revival iStream2

Reviews:

Related manuals for Revival iStream2

Brands by name

Popular brands