Manual tuning - FM
1. Carefully extend the telescopic aerial. The aerial should be fully
extended and positioned vertically for optimum reception.
2. Press and release the
On/Off
button to switch on your radio.
3. Press and release the
Mode
button until the '
FM'
mode is selected.
4. Rotate
the
Tuning/Select
control to tune to a station.The frequency will
change in steps of 50kHz. If the radio is tuned to a station of suffi cient
signal strength with RDS information present, then the display may
change to show the station name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Adjust
the
Volume
to the required setting.
7. To switch off your radio, press and release the
On/Off
button.
14
2,7
3
6
4
