13
Operating your radio - FM
1. Carefully extend the telescopic aerial. The aerial should be fully
extended and positioned vertically for optimum reception.
2. Press and release the
On/Off
button to switch on your radio.
3. Press and release the
Mode
button until the '
FM'
mode is selected.
4. Rotate
the
Tuning/Select
control clockwise and then press and
release the
Auto Tune
button. Your radio will scan in an upwards
direction (low frequency to high frequency) and stop automatically
when it fi nds a station of suffi cient strength.
5. After a few seconds the display will update. The display will show
the frequency of the signal found. If the signal is strong enough and
there is RDS data present then the radio will display the station
name.
6. Rotate
the
Tuning/Select
control anti-clockwise and then press
and release the
Auto Tune
button. Your radio will scan the FM
band in a downwards direction (high frequency to low frequency).
7. When the waveband end is reached your radio will recommence
tuning from the opposite waveband end.
8. Adjust
the
Volume
to the required setting.
9. To switch off your radio press and release the
On/Off
button.
2,9
3
4,6
4,6
