14
Setting the HWS (Humane Wake System) buzzer alarm
A beep tone will sound when using the HWS alarm. The alarm beep will
increase in volume every 15 seconds for one minute followed by one
minutes silence before repeating the cycle. The HWS alarm will sound
for one hour unless turned off by pressing the
On/Off
button
. Pressing
the
On/Off button
whilst the alarm is sounding will cancel the alarm for
24 hours.
1. The HWS buzzer alarm time can be set with the radio switched on or
off.
2. Press and hold down the
Buzzer Alarm button
immediately press
and hold down the
Time set button
until the hour digits and radio
alarm symbol fl ash in the display.
3. Set the required hour using the
Tuning up/down buttons
.
4. Press
the
Time set button
, the minute digits will fl ash in the dis-
play.
5. Set the required minute using the
Tuning up/down buttons
.
6. Press
the
Time set button
to complete alarm setting.
7. To permanently cancel the alarm press and hold down the
Buzzer
Alarm button
until the radio alarm symbol is removed from the display.
The alarm may be re-activated to a previously set time by pressing
and holding down the
Buzzer Alarm button
until the buzzer alarm
symbol appears in the display.
2,4,6
2
3,5
3,5
7
