background image

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

18

Software version - DAB only

The software display cannot be altered and is for your reference only.

1.   To view the software version your radio has, press and release the 

Setup button 

[Press and hold the Select button on the front panel]

 

until "Station order" appears on display.

2. Press 

the 

Tuning Up or Down buttons

 until "Software version" appears 

on the display. The software version will appear on the display.

Prune stations - DAB only

Some DAB services may stop broadcasting or you may not be able to 
receive  a station. Prune stations will delete the DAB stations from your 
station list that can no longer be received.

1.  Press and release the 

Setup button 

[Press and hold Select button 

on front panel]

 until "Station order" appears on the display. Press and 

release the 

OK/Select button 

[Select button on front panel] 

.

2. Press 

the 

Tuning Up

 or 

Down buttons

 until "Prune stations" appears 

on the display. 

3.  Press and release the 

OK/Select button 

 [Select button on front panel] 

 

to select.

2

2

1

1,3

2

2

1

Summary of Contents for MP-16





















































Reviews: