Roberts Fusion User Manual Download Page 49

Page: 49 / 52

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

Auxiliary Input (Line in) socket

A 3.5mm stereo

Auxiliary Input socket

is provided on the rear of your

radio to permit an audio signal to be fed into the unit from an external
audio device such as iPod, MP3 or CD player.

1. Connect a stereo or mono audio source (for example, iPod, MP3 or

CD player) to the

Auxiliary Input socket

(marked "Aux In").

2. Press and release the

Mode

button until 'Auxiliary input mode' is

selected on the display.

Note:

The Auxiliary input mode can only be selected when a plug is

inserted into the socket.

3. Adjust

the

Volume

control on your iPod, MP3 or CD player to ensure

an adequate signal and then adjust the volume on the radio for
comfortable listening.

4. Remove the cable from the Auxiliary input socket or press and release

the mode button to cancel the auxiliary input mode.

1.5A

USB socket for software upgrade

In the event that any software update is made available for your radio,
information on how to update your radio will be made available via our
website at

http://www.robertsradio.co.uk

Summary of Contents for Fusion





















































Search results

Summary of Contents for Fusion

Reviews:

Related manuals for Fusion

Brands by name

Popular brands

Roberts Fusion, User Manual

Search results

Summary of Contents for Fusion

Reviews:

Related manuals for Fusion

Brands by name

Popular brands