If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
To return to auto clock set mode
1. Press
the
On/Off
button to switch on the radio. If necessary press and
release the
DAB/FM/AUX
button to put the radio into DAB mode.
2. Press
the
Menu
button once or twice as needed until "Main Menu"
appears on the display. Rotate the
Tuning/Select
control until "Set
up" shows on the display.
3. Press and release the
Tuning/Select
control to enter the Set up menu
and rotate until "Clock" appears on the display. Press and release the
Tuning/Select
control to enter clock setup.
4. Rotate
the
Tuning/Select
control until "Auto clock" appears on the
display.
5. Press and release the
Tuning/Select
control.
6. The radio will immediately set its time according to the information
received with the DAB broadcast. The radio will return to normal radio
operation.
Note: If you select "Auto clock" and no DAB signal is found, you should
either position the radio or its aerial so that a signal can be received, or
revert to manual clock mode (see page 20).
1
1
2-5
22
2
