7
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press
the
On/Off button
to switch on your radio the display will show
"Roberts" for a few seconds.
3. If this is the
fi
rst time the radio is used a quick scan of the Band III
DAB channels will be carried out. This is known as "Auto tune". The
display will show "Now tuning". If the radio has been used before the
last used station will be selected.
4. During the scanning process, the lower line of the display shows a
bar-graph indicating progress of the scan.
5. When the Auto tune is completed the
fi
rst station (in numeric-alpha
order 0...9...A....Z) will be selected. The
fi
rst station in the list of stations
found will be played. The display will show the station name in the
fi
rst
line of the display and other information in the second line.
6. If the station list is still empty after the Auto tune your radio will display
"No Signal".
7. If no stations are found, "Service not available" will be displayed and
it may be necessary to relocate your radio to a position giving better
reception. You should then carry out an auto tune to
fi
nd stations as
described on page 10 (see
Finding new stations
on page 10).
2
