13
Operating your radio - FM
1. Carefully extend the telescopic aerial.
2. Press
the
On/Off button
to switch on your radio.
3. Press
the
Band button
to select the FM band.
4. Press and release the
Auto Tune button
.
Your radio will scan in
an upwards direction (low frequency to high frequency) and stop
automatically when it
fi
nds a station of suf
fi
cient strength.
5. After a few seconds the display will update the display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS data present then the radio will display the station name.
6. Press and hold the
Auto Tune button
for 2 seconds
to scan the FM
band in a downwards direction (high frequency to low frequency).
7. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
8. Adjust
the
Volume
and
Tone controls
to the required setting.
9. To switch off your radio press the
On/Off button
.
The use of radio station presets for selecting your preferred radio
stations is described on page 18.
2,9
3
4,6
8
8
