ROBERTS GORDON
®
CTH2-Series S
UBMITTAL
S
HEET
© 2004 Roberts-Gordon
APPLICATIONS, ENGINEERING AND DETAILED GUIDANCE ON SYSTEMS DESIGN, INSTALLATION AND PRODUCT PERFORMANCE IS AVAILABLE UPON REQUEST. ROBERTS GORDON
®
PRODUCTS ARE TO BE
INSTALLED ONLY IN ACCORDANCE WITH LOCAL LAWS, CODES AND REGULATIONS, AND ONLY BY A CONTRACTOR QUALIFIED IN THE INSTALLATION AND SERVICE OF GAS-FIRED HEATING EQUIPMENT.
Frame Shield Installation
Reflector Side Extension Installation
Shield
Description
Part Number
Deco Grille Shield
01365900
NOTE:
If the Decorative Grille system is to
be installed in an area with considerable
air movement, it is recommended that one
#8 x 3/8 (3.9 x 9.5mm) sheet metal screw
be installed per reflector extension to
prevent it from blowing over.
A
Reflector Side
Extension
Cut Relief Notches for Tube
and Reflector Hangers
Insert Screw
here
Distance "A"
Extension
Minimum
Maximum
Part No.
Width
2" (4 cm)
6" (15 cm)
01370408
8" (20 cm)
6" (15 cm)
10" (26 cm)
01370412
12" (30 cm)
10" (26 cm)
14" (37 cm)
01370416
16" (40 cm)
Description
Part Number
Reflector Side Extension
01370412
