Roberts Gorden bzc 700 Operation Manual Download Page 15

SECTION 5 :THE ROBERTS GORDON

®

BZC 700 C

ONTROLLER

W

ARRANTY

11

SECTION 5 :THE ROBERTS GORDON

®

BZC

700 CONTROLLER WARRANTY

Subject to the conditions set out below, For 12
months from the date of purchase by the original cus-
tomer or 18 months from date of shipment by
Roberts-Gordon, Roberts-Gordon will provide, free
of charge, replacement parts for any part of the
ROBERTS GORDON

®

BZC 700 Controller that fails

because of defects in materials or workmanship.

Roberts-Gordon replacement parts are warranted for
the period of the original ROBERTS GORDON

®

BZC

700 Controller warranty.

ROBERTS-GORDON WILL NOT PAY FOR:

Service trips, service calls, labour charges, or ship-
ment of replacement parts.

Roberts-Gordon will not be liable for any damage to
the Goods due to:

Failure to install, operate or maintain the
ROBERTS GORDON

®

BZC 700 Controller as

directed in the installation and operation manual.
The Customer must follow requirements printed
in this manual;

Fair wear and tear, misuse, abuse, neglect or
modification of the ROBERTS GORDON

®

BZC

700 Controller in any way;

Improper service, use of replacement parts or
accessories that are not specified by Roberts-
Gordon;

Improper installation, or any relocation of the
ROBERTS GORDON

®

BZC 700 Controller after

initial installation;

Incorrect supply, accident, fire, flood, acts of God
or other casualty;

Use of the ROBERTS GORDON

®

BZC 700

Controller for other than its intended purpose;

Use of the ROBERTS GORDON

®

BZC 700

Controller in a corrosive atmosphere or any
atmosphere containing contaminants;

Use of the ROBERTS GORDON

®

BZC 700

Controller in the vicinity of combustible or explo-
sive materials;

Shipping. Any claim must be filed with the carri-
er;

Any defect in the ROBERTS GORDON

®

BZC

700 Controller arising from any drawing, design
or specification supplied by or on behalf of the
Customer;

To the failure of parts not manufactured by
Roberts-Gordon; or

In respect of any claim where the total Price for
the ROBERTS GORDON

®

BZC 700 Controller

has not been paid.

THIS WARRANTY IS VOID IF:

The ROBERTS GORDON

®

BZC 700 Controller

is not installed by a suitably qualified electrician;

The Customer cannot prove original purchase
date and required annual maintenance history;

Any data plate and/or serial number on the
ROBERTS GORDON

®

BZC 700 Controller is

removed, defaced, modified or altered in any
way;

The ROBERTS GORDON

®

BZC 700 Controller

is transferred. This warranty is non-transferable;
or

Roberts-Gordon is not permitted to inspect the
damaged ROBERTS GORDON

®

BZC 700

Controller and/or component parts.

Except in respect of death or personal injury caused
by Roberts-Gordon's negligence, Roberts-Gordon's
liability, and the Customer's exclusive remedy under
this warranty or any implied warranty is limited:

To providing replacement parts during the term of the
warranty; and

In respect of damage to property arising out of
Roberts-Gordon's negligence or any defect in the
ROBERTS GORDON

®

BZC 700 Controller to £2 mil-

lion.

All other rights, warranties or conditions implied by
statute, common law or otherwise are excluded to
the fullest extent permitted by law. Roberts-Gordon
shall in no event be responsible for loss of profit,
business, revenue, contract, goodwill or indirect, spe-
cial or consequential loss or damage (whether for
loss of profit or otherwise).

Roberts-Gordon shall not be responsible for failure to
perform under the terms of this warranty if caused by
circumstances out of its control, including but not lim-
ited to fire, flood, strike, government or court orders,
unavailability of supplies, parts or power.

LIMITATIONS ON AUTHORITY OF REPRE-
SENTATIVES

No representative of Roberts-Gordon, other than an
authorised officer, has authority to change or extend
these Conditions. Changes or extensions shall be
binding only if confirmed in writing by Roberts-
Gordon's duly authorised officer.

READ YOUR  INSTALLATION  MANUAL

If you have questions about the ROBERTS GOR-
DON

®

BZC 700 Controller, please contact your

installing professional. Should you need replacement
parts or have additional questions, call or write to
Roberts-Gordon:

Roberts Gordon Europe Limited

Oxford Street

Bilston, West Midlands, WV14 7EG  UK

Telephone: +44 (0) 1902 494425

Fax: +44 (0) 1902 403200

On the web at:

www.rg-inc.com

Summary of Contents for bzc 700
















Reviews: