Rob
er
t Juliat r
eser
ve the right t
o change or alt
er an
y of the it
ems detailed on this page
, t
o incr
ease or impr
ov
e man
uf
ac
turing t
echniques without prior notic
e.
VALID SINCE
:
26/11/10
TECHNICAL FILE
FOLLOWSPOT STAND
robert juliat
32, rue de Beaumont F 60530 Fresnoy-en-Thelle - phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr
DN30750701_GT4000SR.indd
H1
H1 = H2 = H3.
H2
H3
725 /
1030
1
2
10
11
3
4
5
6
6
6
7
7
9
NO !
130Kg /
286Ib
870 /
1070
PUTTING THE LIGHTING UNIT
ONTO ITS STAND.
Using instructions.
A - Preparing the stand.
- Follow the instructions indicated on the stand sticker.
- Adjust equally the height of each leg.
- The leg collar 10 must always be set into a leg extension holes,
never between two holes or higher than the last hole.
Never use the stand higher than the leg collar position.
B - Mounting the lighting unit.
The stand allows 2 types of mounting.
- Lighting unit that has 2 holes on its yoke 3 .
- Lighting unit that has 1 central hole on its yoke 4
(First remove the two bolts 5 before mounting ).
- Remove the knobs 6 .
- Place the yoke vertically towards the bottom 7 .
- Place the yoke onto the stand as shown.
Note.
This operation should be carried out with at least 2 people.
C - The head smoothness adjustement.
This is carried out at the factory, but after some time, a check-up
may be required.
The head rotation smoothness adjustement is obtained by the
nut M14 9 and a spring washer. Adjust the nut to obtain the
smoothness required.
D - Collar and chain set
11 (on GT 4000 only).
Stretch
out the chain by lowering the chains supports to the
same height on the legs 1 .
- Then, tighten strongly the wing nuts 2 .
E - Final check.
Carry out some movements with the lighting unit, to check that
all has been well tightened on the stand.
F - Recommendations.
CAUTION : Please read all instructions carefully before operating the
appliance :
- Lighting unit is for stand use only, do not hang.
- Professional equipment: service by a qualified technician only.
-
Do not move or carry
the lighting unit, once mounted on the stand.
- Maximum balanced weight allowed = 130 Kg (286 pounds).
2
- GT 4000
- GT 4000 S
- GT 4000 R
