Robert Juliat Flo 1459, Technical File

Page: 10 / 43

Section A - 5
Rob
er
t Juliat r
eser
ve the right t
o change or alt
er an
y of the it
ems detailed on this page
, t
o incr
ease or impr
ov
e man
uf
ac
turing t
echniques without prior notic
e.
TECHNICAL FILE
FOLLOWSPOTS
robert juliat
32, rue de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.com
Power supply unit (P.S.U.) :
1200W 1800W
CONNECTIONS.
Mains voltage.
- Check the conformity of the mains voltage input with the values indicated
on the identification plate of the PSU (mains voltage & lamp power).
Manual version :
Motorised version :
FPACO00068
Lighting unit / Power supply connection.
- Connect the lighting unit's power cable B by passing it
inside the yoke.
- Leave a little slack and then block the cable B into the lock d .
- Place the lamp into position - refer to section A - 7.
- Connect the cable e to the mains.
CAUTION - For your security !
- Never open the lamp house's bonnet and trapdoors
when the lighting unit is on.
- Do not change the safety switches.
- Never connect to a dimmable channel.
- Use only when the lamp is in place.
DESCRIPTION : 1800W
A 1800W Hot restrike followspot.
B Lighting unit's power cable.
Cable 18G 1,5mm
2
, length 3m equipped
with 16 x 16A male HARTING connector.
C Power supply unit.
Make sure the fan is working correctly
when switching on the unit.
d
DESCRIPTION : 1200W
A 1200W Hot restrike followspot.
B Lighting unit's power cable.
Cable 18G 1,5mm
2
, length 3m equipped
with 16 x 16A male HARTING connector.
Detachable on the motorised version.
LUCY / SK /
FLO / VICTOR
• Use only the listed cables to connect to the mains -
Refer to the respective PSU technical file.
e
A
B
C