Robert Juliat Dalis ACCESS 863, Manual

Page: 24 / 26

EN
EN -22-
6 Service
6.1 Preventive maintenance
6.1.1 Frequency
General maintenance should be performed at least once a year or more frequently if the equipment is
operated in adverse conditions (smoke, heat, humidity, touring, etc.).
6.1.2 General cleaning
Remove dust from the unit.
Front glasses can be cleaned with solutions containing alcohol.
6.1.3 General visual check
•
No trace of heat.
•
No loose contacts.
•
No missing parts.
•
Tighten mechanical assemblies (screws, bolts and nuts, etc.).
6.2 Analysis
In case of problem, contact RJ distributor with the following information:
•
Model, version and serial number of the product.
•
From the menu status:
o
Software version
o
LED board IDs
o
Device hours
•
Description of the problem.
6.3 Electronic thermal management system
In case of overheating, light intensity will be reduced by the system. “Power reduction X%” will be
shown on the display with the reducing percentage.
6.4 Firmware update
1. Firmware available on www.robertjuliat.com
2. Download and unzip the file
3. Switch on Dalis and config IP address (
DATAMODE>ARTNET>IP-CONF ):
a. DHCP = OFF
b. ADDRESS = AAA.BBB.CCC.XXX
c. MASK = 255.0.0.0
d. Exit to main menu to validate modifications
4. Set the Network IP of the computer :
a. ADDRESS = AAA.BBB.CCC.YYY with YYY ≠ XXX
b. MASK = 255.0.0.0
5. Connect Network from computer to Dalis, if you don´t have an Auto MDI-X or a switch, use a
cross link cable
6. Open a web browser (Internet Explorer, Firefox, Chrome…)
7. Enter the URL address of the Dalis: http://AAA.BBB.CCC.XXX
8. First, install the Main Program
a. Select the firmware file dalis860_VX.XX.upd
b. Press submit button
9. Install the Bootloader
a. Select the firmware file dalis_bootloaderVX.XX_boot.upd
b. Press submit button
10. Update message displays on Dalis display
11. When the update is completed, the Dalis shows the new firmware version
6.5 Factory defaults
Select FACTORY DEFAULT in the main menu to reset all values and parametres