SS476 MP Cabinet
8
1. Doors
A. The doors are provided with a three way
adjustment feature. Height, level and fit to frame
gasket can be adjusted. The use of a #2 posidrive
screwdriver is recommended.
If door is out of level or too close to one side
adjust door left or right with screw 1 shown
on page 3 figure E.
If door is too high or low adjust door down or up
with screw 2 shown on page 3 Figure E.
If door opens stiffly, sqeaks or rubs against
gasket, adjust door outwards with screw 3 shown
on page 3 figure E.
B. Check the swing of the door. The hinges are
provided with a 110° black plastic stop so that
they will not swing into the light bulb. If no bulb is
in the way of the door this stop can be removed
so that the door can swing 170°. Be sure to follow
#12 under recess installation.
C. For “E” option doors. Activate the door heater
from switch on outlet shelf. Within 3 minutes the
center portion of the door will get warm.
The center area of the mirror (approximately 2
CHECKLIST • Care & Maintenance
Rev. 5 12/02
Cabfax #0476
square feet) will provide fog-free viewing. If the
de-mister does not function check wiring to the
outlet shelf. Do not attempt to repair the door.
There are no field serviceable parts. Contact the
factory or your dealer.
2. Lights
A. Please note: the MPIL1.5 Light fixture contains a
Safety Disconnect switch which deactivates the
sockets when no bulb is installed. Be sure the
bulb is seated firmly in the sockets. The MPFL1.5
Fluorescent light can exhibit flickering when the
improper dimmer, loose wire, or loose bulb Is
present.
3. Cleaning
A. The cabinet door and interior are constructed of
mirror and anodized aluminum. Use only a damp
cloth to clean. Mirrors are damaged by the use of
ammonia or vinegar based cleaning agents. Use
rubbing alcohol for stubborn marks
B. Use no abrasive cleansers on any part of the
cabinet.
Limited Warranty One Year Term
ROBERN warrants to the original purchaser that, it
will, at its election repair, replace, or make appropriate
adjustment to products made by this company shown to
have significant defects in material or workmanship which
are reported to ROBERN in writing within one (1) year
from the date of delivery. ROBERN is not responsible for
installation costs.
The warranty is void in the event the product is damaged
in transit, or if damage or failure is caused by abuse,
misuse, abnormal usage, faulty installation, damage in
an accident, improper maintenance, or any repairs other
than those authorized by ROBERN. At the expiration of
the one year warranty period, ROBERN shall be under
no further obligation under any warranty, expressed or
implied, including the implied warranty of merchantability.
ROBERN shall not be liable for any consequential
damages arising out of or in connection with the use
or performance of its products. Some states do not
allow limitations on how long an implied warranty lasts
or do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or
exclusion may not apply to you.
Any liability against ROBERN under any implied warranty,
including the warranty of merchantability, is expressly
limited to the terms of this warranty. Permission to return
any merchandise under this warranty must be authorized
by ROBERN and returned prepaid by the purchaser.
Claims under this warranty should be sent directly to your
dealer.
THE FOLLOWING PATENTS APPLY TO
THIS PRODUCT:
U.S. PAT. NO. 5,164,861
U.S. PAT. NO. 5,350,227
U.S. PAT. NO. 5,355,627
©2002 ROBERN, INC.
ALL RIGHTS RESERVED
