background image

SS476 MP Cabinet

Robern

701 N. Wilson Ave.

Bristol, PA 19007

800.877.2376

SS476 MP CABINET INSTRUCTIONS

General Notes

1.  Unpack the cabinet. Check the box thoroughly 

  for all hardware and loose parts as follows:

  A. Cabinet 

  B. Hardware Bag 

  C. Shelving 

 

  D. “Z’ Bracket 

  E. Swing Out Magnifying Mirror  

    (or mail in card for SOMM)

2.  Remove the doors from the cabinet and store the  

  doors in the cabinet box. Be sure edges of the doors  

  are protected. Removing the doors allow for easy and 

  fast installation of the cabinet system.

3.  A square and plumb installation insures proper door 

  operation. A square and level are necessary for  

  proper installation.

4.  Improper installation voids the warranty. Installed  

  cabinets cannot be returned.

5.  If you experience any problems with your cabinet, 

  contact your dealer or Robern directly. 

 

Robern• 701 N. Wilson Ave • Bristol, PA 19007

 

Limited Warranty One Year Term on page 8

1.  MP Cabinet

 

Refer to model number designations below 

 

to determine if cabinet was ordered.

2.  Glass Shelves

 

–   4 Shelves are provided 

 

 

with each cabinet 

 

–   3 Shelves are provided 

 

 

with each “E” option cabinet 

3. “Z” Mounting Brackets

 

–  Bracket used for surface  

 

 

 

 

mounted cabinets.

4. Hardware Bag • Contains the Following

 

A.  12 Clear Snap-In Shelf Clips

 

B.  46 Shelf Hole Plugs

 

C.  6 SMS/WOOD Screws #10 X 2”

 

D.  5 SMS/Wood Screws #10 X 3”

 

E.  8 Connector Block Screws #10 X 1/2”

 

F.  2 MP65 Connector Blocks

 

G.  15 Black Screw Head Caps

 

H.   3 Top Mount “Z’ Clip

 

I.  6 Plastic Anchors

Part List – MP Cabinet

MODEL NUMBER DESIGNATIONS

Product  

Type 

Mirror   Mirror 

Hand 

 Options 

 

 

Shape  Edge 

CABINETS  4”D    6”D   8”D

MP16   

(D4)  D6  D8 

A • Arch 

B • Bevel 

N •  L or R Hand 

E •  Electric

MP20 

(D4)  D6  D8 

F • Flat 

P • Plain 

L •  Left Hand 

MP24 

(D4)  D6  D8 

 

 

R •  Right Hand 

LIGHTS

MP-L1.5 or MP-L3.5

SIDEKIT 

 

 

 

 

 

 

MPSK40 

 

 

 

 

B • Bevel 

 

 

 

 

 

 

P • Plain 

 

 

 

 

 

 

 

 

PLEASE NOTE: The MP-L3.5 light fixture requires special consideration concerning overall 

dimensions and brackets. Refer to instructions supplied with the fixture.

 See note below for MP-L3.5

D8 - 8” Deep
D6 - 6” Deep
D8SR - 8” Semi Rec 4”
D6SR - 6” Semi Rec 4”

A • Arch

F • Flat

Cabfax #0476

Summary of Contents for SS476 MP









Reviews: