UK
INSTRUCTIONS
IMPORTANT read these instructions for use carefully so
as to familiarize yourself with the appliance before con-
necting it to its gas cartridges. Retain these instructions
for future reference.
·
This stove should only be used with Primus 220693,
220794, 220294 butane-propane mixture gas cartridges
with comply EN417. It may be hazardous to attempt to fit
other types of gas cartridges.
·
This stove is designed for use outdoors away from any
flammable materials. The stove must be used on a level,
stable, non-flammable surface. The appliance should be
protected from direct draughts but in a well-ventilated
place.
·
No modifications should be made to any part of this stove
and repairs and maintenance should only be carried out by
qualified persons.
·
DO NOT MODIFY THE APPLIANCE!
·
MAXIMUM PAN SIZE TO BE USED: 250mm
·
DO NOT USE A SOLID PLATE OR OVERSIZED PAN WITH
THIS PRODUCT. IT MAY BE DANGEROUS TO DO SO!
·
ONLY USE WITH A PAN SIZE AS SPECIFIED IN THESE
INSTRUCTIONS!
CONNECTING TO A GAS CARTRIDGE
·
If the stove is fitted to a cartridge that is empty then read
“Removing Cartridge”.
·
This stove is fitted with sealing washers. Check that they
are present and in good condition before connecting to a
cartridge. Do not use if a seal is damaged or worn.
·
Do not use an appliance which is leaking, damaged, or
which does not operate properly.
·
Only change gas cartridges outdoors or in a well-ventilated
place away from naked flames, any other source of igniti
-
on, and other people.
·
Close control valve by turning knob.
·
In an upright position, carefully screw the gas cartridge
onto the stove taking care not to cross thread. Screw
down until the sealing washer meets the cartridge. Tighten
hand tight only.
·
Repeat these instructions to connect gas cartridge to
second burner.
·
If there is a smell of gas or you suspect a leak take the
appliance to a well-ventilated place outdoors away from
any sources of ignition. If you wish to check for leaks on
your appliance, do so outside. Do not try to detect leaks
using a flame, use soapy water.
INSTRUCTIONS FOR USE
·
Unfold the legs until they lock in their open position.
·
Holding a lit match near the burner whilst opening the con-
trol valve can also light the stove. For version which has
piezo ignition, hold and push the electronic igniter. Repeat
if necessary for second burner.
·
When burner is lit, turn the control knob clockwise to de-
crease the heat intensity or extinguish, and Anticlockwise
to increase. Do not open valve beyond point where maxi-
mum intensity is reached as this may cause unnecessary
flaring and waste gas.
·
Do not move the stove once lit as this may result in flaring.
A warm up period of about 1 minute is required.
·
The stove must be used on a stable horizontal surface.
Ensuring that the stove is secure.
·
Always operate the stove at least 60cm away from walls
and ceilings and never near flammable materials.
·
Be careful not to touch hot parts of this stove during and
after use. Handle with care. Keep children away from this
appliance.
·
Extinguish by turning control knob fully clockwise. Check
that the stove is fully extinguished before leaving unatten-
ded.
REMOVING THE CARTRIDGE
·
Check that the stove is off by turning control knobs fully
clockwise and checking that the stove has fully extinguished.
·
Only change gas cartridges outdoors or in a well-ventilated
place away from naked flames and any other source of
ignition.
·
Unscrew the cartridge from the stove anticlockwise and
refer to the section “connecting to a gas cartridge” for
refitting a new cartridge.
·
The cartridge may be disconnected even if some gas remains.
·
Check the contents of a cartridge by shaking and listening
for the liquid gas.
·
Dispose of as per instructions printed on the cartridge.
Now be removed by unscrewing with a spanner. Wash the
jet in petrol. Do not use metallic objects to clean the jet.
Reassemble the stove. Check for leaks after replacing the
jet using soapy water only.
FIRE BEE STOVE
2
