48
6. Commissioning
NOTICE
6.6.4 Grinding spindle infeed
Infeed
Retract
Fig. 43: Infeed using the handwheel
Turn the handwheel clockwise (red arrow)
Turn the handwheel counter clockwise (green arrow)
6.6.5 Grinding with reciprocating movement
1. Move the machine using the guide handles over the area to
be worked on with reciprocating movements.
2. Feed the abrasive using the handwheel (1) as required.
Fig. 44: Grinding with reciprocating movement
6.7
Switching off the engine
Risk of engine damage!
The engine can be damaged if it is stopped suddenly when
operating at a high speed.
►
Before switching off the engine when it has been running
at high speed and under full load, reduce its speed and al-
low it to idle for about one minute.
